AutoJeweler LED Illuminated Kia Radiator Grille Emblem, Gloss Black Modern Stylized "KN" Logo - Plug & Play

Product Description:

Upgrade your Kia with this Gloss Black Illuminated Grille Emblem, featuring bright white LED perimeter lighting and a clean, modern appearance designed to stand out day or night.

The emblem features a smooth gloss black mirror finish surrounded by a crisp white illuminated border. When powered off, it maintains a clean blackout appearance. When illuminated, the bright white LED outline highlights the complete modern Kia emblem design without changing colors, requiring an app, or using a handheld remote.

This complete kit includes the illuminated emblem, rear mounting hardware, and an upgraded plug-and-play wiring harness with a waterproof quick-connect, protective wire loom, Add-A-Fuse power tap, ring-terminal ground, and integrated power module.

---

⭐ Key Features:

• 💡 Bright White LED Illumination – Crisp white LED lighting surrounds the complete emblem for a clean, highly visible glow.
• ⚫ Gloss Black Mirror Finish – Smooth black face provides a premium blackout appearance when the lighting is turned off.
• 🏆 Modern Kia Emblem Design – Replaces the plain factory-style appearance with an illuminated version of the modern Kia logo.
• 🔌 Premium Plug-and-Play Wiring Harness – Complete fused wiring system is included for a cleaner installation without cutting or splicing factory wiring.
• 🌧️ Waterproof Quick-Connect – Secure 2-pin connector allows the emblem to be disconnected from the main wiring harness when grille or bumper service is required.
• 🛡️ Protective Wire Loom – Wiring is covered with protective split loom to help shield it from abrasion, heat, and engine-bay exposure.
• ⚡ Integrated Power Module – Includes a built-in status light and pre-installed 3M adhesive backing for securely mounting the power module inside the engine compartment.
• 🔩 Secure Stud-Mount Installation – Two threaded rear mounting studs, backing plates, washers, and wing nuts secure the emblem directly to the grille.
• 🚘 Complete Installation Kit – Emblem, mounting hardware, fused power connection, chassis ground, and protected wiring harness are included.
• 🛡️ 1-Year Warranty – Backed by the AutoJeweler Limited Warranty against qualifying defects in materials and workmanship.

---

🚘 Fitment / Compatibility:

Kia Model	Model Years
Kia Telluride	2023–2025
Kia Carnival	2022–2026
Kia K4	2026
Kia K5	2021–2026
Kia Sorento	Verify by emblem dimensions and available mounting area
Kia Sportage	Verify by emblem dimensions and available mounting area
Kia Optima	Verify by emblem dimensions and available mounting area

IMPORTANT: Kia used different emblem sizes, grille designs, and mounting configurations across certain models, trims, and model years. Always measure your factory emblem and inspect the available mounting area before ordering.

This emblem is slightly larger than the factory logo, measuring approximately 9.25 inches wide × 2.25 inches tall. Your grille must provide enough open space for the two threaded mounting studs, rear backing plates, wiring, and mounting hardware.

This product does not use factory clips, alignment pins, or adhesive to mount the emblem. It installs using the included threaded studs, rear backing plates, washers, and wing nuts.

---

📏 Product Dimensions:

• Overall Width: Approximately 9.25"
• Overall Height: Approximately 2.25"
• Mounting System: Two threaded rear studs with backing plates and hardware

Fitment Note: Measure the complete factory emblem and available grille mounting area before ordering. Do not rely only on the vehicle model name.

---

🔧 Installation Overview:

1. Remove the factory grille emblem if required.
2. Test-fit the illuminated emblem and confirm the mounting location.
3. Position the emblem on the front of the grille.
4. Guide the two threaded mounting studs and emblem wiring through the grille openings.
5. Install the included rear backing plates, washers, and wing nuts behind the grille.
6. Tighten the mounting hardware evenly until the emblem is secure. Do not overtighten.
7. Connect the emblem to the wiring harness using the waterproof 2-pin quick-connect.
8. Route the protected wiring harness safely through the engine compartment.
9. Connect the Add-A-Fuse power tap to a compatible 12V fuse circuit.
10. Connect the ring terminal to a secure chassis-ground location.
11. Mount the integrated power module to a clean, dry surface using its pre-installed 3M adhesive backing.
12. Secure all wiring away from moving parts, sharp edges, and excessive heat.
13. Test the emblem before completing installation.

No Bluetooth controller, mobile app, handheld remote, or programming is required.

Professional Installation Recommended: Basic hand tools and familiarity with automotive fuse taps, chassis grounds, grille removal, and engine-bay wiring are recommended. Professional installation is advised if you are unfamiliar with 12V automotive electrical systems.

---

📦 What’s in the Box?

• 1x Gloss Black Illuminated Kia Grille Emblem
• Mounting Bracket & Hardware
• Premium Plug-and-Play Wiring Harness with Integrated Power Module
• Installation Instructions

---

⚙️ Specifications:

• Brand: AutoJeweler
• Finish: Gloss Black Mirror Finish
• LED Color: Bright White
• Lighting Style: Illuminated Perimeter Outline
• Voltage: 12V Automotive System
• Power Connection: Add-A-Fuse Power Tap
• Electrical Connector: Waterproof 2-Pin Quick-Connect
• Mounting: Threaded Studs with Rear Backing Plates and Hardware
• Material: Acrylic Face with White LED Back-Lit Housing
• Dimensions: Approximately 9.25" W × 2.25" H
• Application: Front Grille
• LED Modes: Static White LED (6000K–6500K)
• Controller Required: No

---

---

🛡️ Warranty, Shipping & Returns:

---

🔥 Why Choose AutoJeweler?

This illuminated Kia grille emblem is sold as a complete installation kit—not just a loose emblem with unfinished wiring. The included premium harness provides a waterproof quick-connect, protective wire loom, fused power connection, secure chassis ground, and integrated power module for a cleaner, more professional installation.

Combined with its gloss black mirror finish, bright white illumination, secure stud-mounted design, and AutoJeweler warranty support, this emblem provides a premium front-end upgrade built for drivers who want more than a basic replacement badge.

---

👉 Upgrade your Kia with a gloss black illuminated grille emblem and give your front end a bright, modern appearance that stands out day or night.