2018–2024 Infiniti Q50 Multicolor Flow Series LED Grille Emblem – Gloss Black/Carbon Fiber

🔥 OVERVIEW

Upgrade your Infiniti Q50 with the 2018–2024 Infiniti Q50 V2 Multicolor Flow LED Grille Emblem. Designed as a direct replacement for compatible factory front emblems, this illuminated grille badge adds animated color-changing lighting and a premium custom appearance to your Q50.

The upgraded V2 Flow Series design features smooth color-chasing effects, vibrant transitions, solid colors, and smartphone control through the Zengge Bluetooth app. Its built-in controller and simple two-wire power connection provide a clean installation without requiring a separate handheld remote.

Available Finishes: Gloss Black and Carbon Fiber

Approximate Size: 7.5" wide × 4" tall

⚡ FEATURES & CONTROLLER

• V2 Multicolor Flow Series Lighting: Smooth chasing, flowing, rainbow, fading, breathing, pulsing, music-sync, and solid-color modes.
• Bluetooth App Control: Adjust colors, brightness, speed, patterns, and animation styles directly from your smartphone.
• Zengge App: Compatible with supported iOS and Android devices.
• DIY Custom Modes: Create and save personalized lighting effects in real time.
• Built-In Controller: Integrated controller design reduces wiring and eliminates the need for a separate external control box.
• Two-Wire Installation: Red wire connects to 12V positive power, and black wire connects to ground.
• High-Output LEDs: Bright, vibrant illumination with smooth color transitions and animated effects.
• Premium Finish Options: Available with a Gloss Black or Carbon Fiber-style face.
• Automotive-Grade Construction: Heat-resistant, vibration-resistant, and sealed for outdoor automotive use.
• IP68 Weather Resistance: Designed for year-round exposure when installed correctly.

🚗 VEHICLE COMPATIBILITY

Fits: 2018–2024 Infiniti Q50 models equipped with the compatible raised / 3D-style front grille emblem.

Fitment Type: Direct-replacement front grille emblem for compatible vehicles.

Important Fitment Requirements:

• The factory emblem must be the raised / 3D style.
• The emblem must match the shape and mounting style shown in the product photos and compatibility guide.
• The vehicle must not have a camera, radar unit, braking sensor, or driver-assistance sensor built into or positioned behind the front emblem.

Not Compatible With:

• Flat-style Infiniti front emblems
• Glass-style Infiniti front emblems
• Emblems with an integrated front camera
• Vehicles with radar or braking sensors mounted behind the emblem
• Most Red Sport models equipped with front-emblem sensor systems
• Infiniti Q50 models whose emblem shape, mounting tabs, or dimensions differ from the compatible raised / 3D design

Fitment Verification Required: Fitment is based on the design of your existing front emblem—not only the vehicle year and model. Please compare your factory emblem with the listing photos before ordering.

If you are unsure, send AutoJeweler Support a clear front-facing photo of your factory grille emblem before purchasing. Our team will help confirm compatibility.

📦 WHAT’S INCLUDED

• 1× Infiniti Q50 V2 Multicolor Flow LED Grille Emblem
• 1× Integrated Bluetooth controller
• Power and ground wiring leads
• Extension wiring, if included with the selected configuration
• Quick-start wiring guide
• QR code installation and support resources
• 1-Year Limited Warranty

📋 SPECIFICATIONS

• Product: Infiniti Q50 LED Grille Emblem
• Version: V2
• Lighting Style: Multicolor RGB Flow Series
• Control Type: Bluetooth smartphone app
• App Name: Zengge
• App Compatibility: iOS and Android
• Lighting Effects: Flowing, chasing, rainbow, fading, breathing, pulsing, music-sync, DIY, and solid-color modes
• Color Output: Full-spectrum multicolor RGB
• Voltage: 12V DC
• Wiring: Two-wire connection — red = positive power, black = ground
• Controller: Built into the emblem assembly
• Approximate Size: 7.5" wide × 4" tall
• Material: ABS housing with acrylic illuminated front face
• Finish Options: Gloss Black or Carbon Fiber
• Weather Resistance: IP68-rated sealed construction
• Mounting Location: Front grille
• Application: Direct replacement for compatible raised / 3D-style factory emblems

🔧 INSTALLATION & FITMENT

• Skill Level: Moderate DIY
• Estimated Install Time: Approximately 1–2 hours
• Mounting Method: Factory-style mounting points, tabs, or included mounting provisions depending on vehicle configuration
• Power Connection: Parking lights, daytime running lights, accessory power, fuse tap, or another properly fused 12V source
• Ground Connection: Chassis ground or battery negative terminal
• Tools Needed: Basic hand tools, trim-removal tools, wiring connectors, and the preferred fused power-connection method

Installation Overview:

1. Verify that your factory emblem is the compatible raised / 3D style.
2. Remove the grille or access panels required to reach the rear of the factory emblem.
3. Carefully remove the original emblem from the grille.
4. Install and secure the new V2 Flow Series LED emblem.
5. Connect the red wire to a properly fused 12V positive source.
6. Connect the black wire to a secure chassis ground or battery negative terminal.
7. Download the Zengge app and pair your smartphone with the emblem.
8. Test all lighting functions before reinstalling the grille or bumper components.

Professional installation is recommended if you are not comfortable removing exterior vehicle panels or completing basic 12V automotive wiring. Grille or bumper removal may be required depending on the vehicle.

📱 BLUETOOTH APP CONTROL

The upgraded V2 emblem is controlled through the Zengge Bluetooth app. The app allows you to select colors, adjust brightness and animation speed, switch between dynamic patterns, activate music-sync modes, and create custom DIY lighting effects.

No handheld remote is required. Lighting functions are controlled directly from your compatible iOS or Android smartphone.

Important: Older V1 RGB emblem versions may use the LED Lamp app. This V2 listing uses the Zengge app unless otherwise noted in the instructions included with your order.

🛡️ WARRANTY & SUPPORT

This product includes AutoJeweler’s 1-Year Limited Warranty, covering manufacturer defects and LED or controller failure under normal use.

Warranty coverage does not include incorrect vehicle fitment, physical damage, improper installation, modified wiring, reversed polarity, installation without proper fuse protection, water intrusion caused by installation error, collision damage, or normal wear and tear.

Customers receive access to installation information, troubleshooting procedures, warranty resources, and product-support materials through the AutoJeweler Support Center.

For warranty assistance, visit the AutoJeweler Support Center and submit a warranty request. Customers may also scan the QR code included with their order to access installation and support resources.

Disclaimer: This is an aftermarket illuminated accessory designed to enhance vehicle appearance. It is not an OEM Infiniti product and is not affiliated with or endorsed by Infiniti, Nissan, or any vehicle manufacturer. All trademarks belong to their respective owners. Vehicle names are used only to describe compatibility and common applications.